PIECE DETACHEE POUR PISTOLET TYPE 1911 / 2011

CALES DE CONVERSION TJ\'S 1911 SERIES \'80 TO SERIES \'70? REMPLISSEUR DE FENTE DE CADRE TJS CUSTOM, STANDARD, .065

Les shims de conversion TJ's 1911 Series '80 à Series '70 (Frame Slot Filler) remplacent l'espace utilisé par les "Colt Series '80 Firing Pin Block Actuating Levers" lorsque ceux-ci sont retirés par des armuriers pour obtenir des départs de tir plus nets. Il est nécessaire de combler cet espace dans le cadre pour que le sear ne dérive pas et ne bloque pas le mécanisme de sear / trigger.

Caractéristiques du produit :

• Remplisseur de fente qui s'adapte à l'encoche du cadre, permettant d'installer des glissières et des composants de la Series 70 sur des cadres de la Series 80.
• Aucune altération requise, installation en mode "drop-in".

CALES DE CONVERSION TJ\'S 1911 SERIES \'80 TO SERIES \'70? REMPLISSEUR DE FENTE DE CADRE TJS CUSTOM, STANDARD, .060

Les shims de conversion TJ's 1911 Series '80 à Series '70 (Frame Slot Filler) remplacent l'espace utilisé par les "Colt Series '80 Firing Pin Block Actuating Levers" lorsque ceux-ci sont retirés par des armuriers pour obtenir des départs de tir plus nets. Il est nécessaire de combler cet espace dans le cadre pour que le sear ne dérive pas et ne bloque pas le mécanisme de sear / trigger.

Caractéristiques du produit :

• Remplisseur de fente qui s'adapte à l'encoche du cadre, permettant d'installer des glissières et des composants de la Series 70 sur des cadres de la Series 80.
• Aucune altération requise, installation en mode "drop-in".

PLAQUE DE MONTAGE TRIJICON RMR/SRO/HOLOSUN407C POUR PRODIGY

EEMANN TECH UNIVERSAL GRIP TAPE FOR MAGAZINE

The Eemann Tech Universal Grip Tape delivers a firm, non-slip surface for magazine base pads, enhancing control and consistency during reloads. Designed from high-quality 3M grip tape, each piece is precisely pre-cut to 22mm x 34mm with small radius on corners, ensuring compatibility with most double-stack pistol magazines. Ideal for training, competition, or everyday range sessions, the textured tape offers quick installation and long-lasting adhesion to withstand regular use.

Specification:

• Set includes 5 grip tape pieces
• Cuted from high-quality 3M grip tape
• Dimensions: 22mm x 34mm
• Fits most double-stack pistol magazines
• Textured surface for enhanced grip and control
• Easy, quick application with strong adhesive backing
• Durable performance for frequent use

EEMANN TECH NUMBERED GRIP TAPE SET X10

The Eemann Tech Numbered Grip Tape for Magazine Base Pads offers a smart solution for magazine identification and grip enhancement. Precision-cut from high-quality 3M grip tape, each piece features a laser-cut number from 0 to 9, making it easy to track individual magazines during competitive shooting or training.

Designed to improve handling and reload consistency, the textured surface provides superior control while the strong adhesive ensures long-lasting attachment, even with frequent use. This accessory not only enhances grip but also helps protect your base pads from wear and tear. Perfect for shooters seeking better organization and reliable performance in dynamic conditions.

Specification:

• Set includes 10 grip tape pieces (numbers 0–9)
• Material: High-quality 3M grip tape
• Dimensions: 22?mm x 34?mm
• Fits most double-stack pistol magazines
• Textured surface for improved grip and control
• Strong adhesive backing for secure application
• Color: Black
• Durable for repeated use

EEMANN TECH EJECTOR PIN FOR 1911/2011, SILVER

Eemann Tech Silver Ejector Pin for Colt 1911 and 2011 Models

The Eemann Tech Ejector Pin is designed for Colt 1911, 2011, and their clones.

• Diameter: 0.05" (1.5mm)
• Material: Stainless Steel
• Caliber: All
• Catalog number: 47
• Color: Silver

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are crafted from high-quality carbon, alloyed, or stainless steel using advanced technologies and CNC machines of the new generation.

No fitting required and instant installation in most cases. However, some pistols may differ in production or be pre-modified, which may require the assistance of a certified gunsmith for installation.

EEMANN TECH BARREL BUSHING FOR 1911

High-Quality Barrel Bushing for Colt 1911 and Clones

The Eemann Tech Barrel Bushing is designed for Colt 1911 and its clones.

Available with the following overall lengths:

• 12.8 mm
• 21.1 mm

Color / Material:

• Black / Carbon Steel

Caliber: All

Catalog number: 34

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are made from high-quality carbon, alloyed, or stainless steel using advanced technologies and CNC machines of the new generation.

No fitting required and instant installation in most cases. In some cases, pistols may differ in production or be pre-modified and may require the assistance of a certified gunsmith for installation.

PUIS CHARGEUR 1911 MAGWELL WILSON COMBAT STAINLESS EZ-LOADER

Offre l'ouverture de magasin évasée nécessaire pour des recharges rapides et sûres sans chauffer, meuler ou frapper l'arme. Desserrez les poignées, glissez les onglets sur les douilles de crosse, égalisez avec l'intérieur du magasin et remettez les poignées. Les chargeurs doivent avoir des "bumpers" pour un meilleur fonctionnement.

PISTOLET 1911 SPRING CLARK CUSTOM CUSTOM SEAR SPRING

L'exclusivité de ce ressort réside dans sa "jambe" centrale fendue qui maintient une pression constante vers l'avant sur la détente, empêchant ainsi les dommages au cran de la gâchette et du marteau (ce qui peut provoquer un dangereux "hammer follow") sur les armes équipées de détentes légères ou de travaux de détente personnalisés "traditionnels". Permet au marteau de rester armé dans la plupart des conditions normales sans affecter la rupture ou la traction de la détente. Peut être utilisé avec des détentes légères ou des marteaux de style Gold Cup.

EEMANN TECH PROGRESSIVE RECOIL SPRING FOR 1911/2011 (SPRING WEIGHT: 11 LBS)

Enhanced Recoil Springs for 1911/2011 Pistols

The Eemann Tech Progressive Recoil Spring is designed for 1911/2011 pistols and their clones with a 5" barrel length.

The Progressive Recoil Spring stands out from common springs due to the decreasing distance between coils, starting from the middle of the spring to the last coil.

When pressure is applied, the spring operates in two phases:

• 1st: The first half of the spring, with identical coil spacing, begins compressing from the start.
• 2nd: Once the first half is fully compressed, the second half, with reduced coil spacing, begins compressing.

Each coil increases the spring's compression. Full compression provides maximum resistance and reduces recoil impulse.

Every Eemann Tech Recoil spring is uniquely colored for easy visual identification of its power value throughout its service life.

All springs are coated with polymer heat-treated paint, which remains flexible throughout their service life. The paint does not damage or stain the handgun internally.

Table of Colors:

• 6 lbs - DARK BLUE
• 7 lbs - DARK GREEN
• 8 lbs - GREY
• 9 lbs - BROWN
• 10 lbs - MAGENTA
• 11 lbs - GREEN
• 12 lbs - BLUE
• 13 lbs - WHITE
• 14 lbs - RED
• 15 lbs - ORANGE
• 16 lbs - ROSE
• 17 lbs - YELLOW
• 18 lbs - BLACK

Note: The Eemann Tech Progressive Recoil Spring fits:

• STI 1911/2011 standard 5" Factory Steel Guide Rod
• STI 1911/2011 5" Recoil Master system

No fitting is required for most cases, allowing for instant installation. However, some pistols may vary in production or be pre-modified, potentially requiring the assistance of a certified gunsmith for installation.

EEMANN TECH PROGRESSIVE RECOIL SPRING FOR 1911/2011 10LBS

Enhanced Recoil Springs for 1911/2011 Pistols

The Eemann Tech Progressive Recoil Spring is designed for 1911/2011 pistols and their clones with a 5" barrel length.

The Progressive Recoil Spring stands out from common springs due to the decreasing distance between coils, starting from the middle of the spring to the last coil.

When pressure is applied, the spring operates in two phases:

• 1st: The first half of the spring, with identical coil spacing, begins compressing from the start.
• 2nd: Once the first half is fully compressed, the second half, with reduced coil spacing, begins compressing.

Each coil increases the spring's compression. Full compression provides maximum resistance and reduces recoil impulse.

Every Eemann Tech Recoil spring is uniquely colored for easy visual identification of its power value throughout its service life.

All springs are coated with polymer heat-treated paint, which remains flexible throughout their service life. The paint does not damage or stain the handgun internally.

Table of Colors:

• 6 lbs - DARK BLUE
• 7 lbs - DARK GREEN
• 8 lbs - GREY
• 9 lbs - BROWN
• 10 lbs - MAGENTA
• 11 lbs - GREEN
• 12 lbs - BLUE
• 13 lbs - WHITE
• 14 lbs - RED
• 15 lbs - ORANGE
• 16 lbs - ROSE
• 17 lbs - YELLOW
• 18 lbs - BLACK

Note: The Eemann Tech Progressive Recoil Spring fits:

• STI 1911/2011 standard 5" Factory Steel Guide Rod
• STI 1911/2011 5" Recoil Master system

No fitting is required for most cases, allowing for instant installation. However, some pistols may vary in production or be pre-modified, potentially requiring the assistance of a certified gunsmith for installation.

EEMANN TECH THUMB REST SLIDE STOP FOR 1911/2011

Enhanced Thumb Rest Slide Stop for Colt 1911 and 2011 Models

The Eemann Tech Thumb Rest Slide Stop is designed for Colt 1911, 2011, and their clones.

Material: Stainless Steel
Caliber: All

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are crafted from high-quality carbon, alloyed, or stainless steel using advanced technologies and CNC machines of the new generation.

This is not a drop-in part! Installation by a certified gunsmith is recommended!

• No fitting required and instant installation in most cases.
• In some cases, pistols may differ in production or be pre-modified and may require the assistance of a certified gunsmith for installation.

EEMANN TECH SOLID PLAIN SLIDE STOP FOR 1911/2011 SILVER

High-Quality Eemann Tech Slide Stop for 1911 and 2011 Models

The Eemann Tech Solid Plain Slide Stop is designed for 1911, 2011, and their clones.

• Material: Stainless Steel
• Caliber: All
• Color: Silver; Black

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are crafted from high-quality carbon, alloyed, or stainless steel. These parts are manufactured using advanced technologies and CNC machines of the new generation.

No fitting is required for most installations, allowing for instant setup. However, in some cases, pistols may vary in production or be pre-modified, which might necessitate the assistance of a certified gunsmith for installation.

EEMANN TECH SOLID COMBAT SAFETY FOR 1911/2011

High-Quality Eemann Tech Combat Safety for 1911/2011 Models

The Eemann Tech Solid Combat Safety is designed for Colt 1911, 2011, and their clones.

Made from solid steel bar!

• Material: Alloy Steel
• Caliber: All

Color Options:

• Black
• Silver

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are crafted from high-quality carbon, alloyed, or stainless steel using advanced technologies and CNC machines of the new generation.

No fitting required and instant installation in most cases. However, some pistols may differ in production or be pre-modified, which may require the assistance of a certified gunsmith for installation.

EEMANN TECH COMPETITION SEAR SPRING FOR 1911/2011

High-Performance Sear Spring for Colt 1911 and STI 2011 Pistols

Eemann Tech Sear Competition Spring is designed for Colt 1911, STI 2011, and their clones. This spring features a thickness of 0.8mm, ensuring compatibility with both competition pistols and factory guns.

The middle spring is engineered with a special 45-degree angle to minimize friction with the disconnector, providing the strongest, long-life tension.

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are crafted from high-quality carbon, alloyed, or stainless steel, utilizing advanced technologies and CNC machines of the new generation.

• Material: Carbon Spring Steel
• Caliber: All

No fitting is required for most installations, allowing for instant setup. However, in some cases, pistols may differ in production or be pre-modified, which may necessitate the assistance of a certified gunsmith for installation.

EEMANN TECH THUMB REST SLIDE STOP FOR 1911/2011 BLACK

Enhanced Thumb Rest Slide Stop for Colt 1911 and 2011 Models

The Eemann Tech Thumb Rest Slide Stop is designed for Colt 1911, 2011, and their clones.

Material: Stainless Steel
Caliber: All

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are crafted from high-quality carbon, alloyed, or stainless steel using advanced technologies and CNC machines of the new generation.

This is not a drop-in part! Installation by a certified gunsmith is recommended!

• No fitting required and instant installation in most cases.
• In some cases, pistols may differ in production or be pre-modified and may require the assistance of a certified gunsmith for installation.

EEMANN TECH TWO PIECES MAGWELL FOR 1911, 25LPI CHECKERED / COLOR BLACK

The Eemann Tech Drop-In Magwell for Full size, Commander and Government 1911, 25lpi Checkered.

This magwell is a great way to add extra versatility to your 1911. If you’re using your pistol both for defense and for competition, the two-piece design allows you to remove the bottom of the oversized mag well after a match so it’s a better fit in a standard holster.

• Material: Steel
• Surface: Checkered 25 lpi
• Color: Blued or Stainless
• Weight: 80g
• Sizes of outer bottom part: 32.6 x 6.4mm

No fitting required and instant installation in most cases. In some cases, pistols may differ in production or pre-modified and may require assistance of a certified gunsmith for installation.

EEMANN TECH SEAR PIN FOR 1911/2011

Eemann Tech High-Quality Sear Pin for 1911/2011 Models

The Eemann Tech Sear Pin is designed for Colt 1911, 2011, and their clones.

• Material: Steel
• Caliber: All
• Catalog number: 28

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are crafted from high-quality carbon, alloyed, or stainless steel. These parts are manufactured using advanced technologies and CNC machines of the new generation.

CALES DE CONVERSION 1911 SERIES '80 TO SERIES '70 REMPLIE LE PASSAGE SURETEE

Remplie le passage de la sureté quand elle est supprimé.

WILSON COMBAT 1911 REVERSE PLUG FULL SIZE FOR BULL BARRELS

EEMANN TECH RECOIL SPRING PLUG FOR 1911/2011 BLACK

High-Quality Recoil Spring Plug for Colt 1911 and 2011 Models

The Eemann Tech Recoil Spring Plug is designed for 5” bushing barrel Colt 1911, 2011, and their clones.

• Material: Steel
• Caliber: All
• Catalog number: 33

EEMANN TECH MAGAZINE CATCH LOCK FOR 1911/2011 SILVER

Eemann Tech Magazine Catch Lock for Colt and STI Models

Eemann Tech offers a Magazine Catch Lock designed for Colt 1911, 2011, and their clones.

• Material: Steel
• Caliber: All
• Color: Black, Silver

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are crafted from high-quality carbon, alloyed, or stainless steel using advanced technologies and CNC machines of the new generation.

EEMANN TECH EXTRACTOR FOR 1911/2011 9MM/.40 SW

High-Quality Extractor for Colt 1911 and 2011 Models

The Eemann Tech Extractor is designed for Colt 1911, 2011, and their clones.

Material: Steel

Caliber:

• .45 auto
• .45 auto 80 Series
• 9mm/.40 sw

EEMANN TECH K-HOLE TRIGGER FOR 1911

High-Performance Eemann Tech Adjustable Trigger for Colt 1911

The Eemann Tech adjustable match K-Hole Trigger is designed for the Colt 1911 and its clones.

• Material: Aluminium + Steel
• Caliber: All
• Color: Black; Silver

All EEMANN TECH parts for Colt 1911, STI 2011, and their clones are crafted from high-quality carbon, alloyed, or stainless steel using advanced technologies and CNC machines of the new generation.