PIECE DETACHEE CZ, tout pour customiser ou upgrader votre arme CZ

PERCUTEUR RALLONGE EEMANN POUR CZ 75 SP-01 SHADOW/ SHADOW 2/TS

Enhanced Firing Pin for CZ Models

The Eemann Tech Extended Firing Pin is compatible with the following models:

• CZ 75 SP-01 Shadow
• CZ 75 Tactical Sports
• CZ TS 2
• CZ Shadow 2
• CZ 85 Combat

Caliber: 9x19mm and .40S&W

The Extended Firing Pin resolves the misfire faults caused by weak main or hard primers.

Total length: 2.502" (64mm)

Color: Black

KIT RESSORTS COMPETITION EEMANN POUR CZ SCORPION EVO 3

Enhanced Trigger Springs Kit for CZ Scorpion EVO 3

Reduced-power springs provide a lighter trigger pull for improved accuracy in competition shooting.

Includes:

• Trigger spring
• Disconnector spring

Specifications:

• Made of steel, with thermic treatment for the best performance and quality!
• Trigger pull weight: 5lbs (factory power ~10 lbs).

EEMANN TECH ADJUSTABLE THUMB REST

Optimized Thumb Rest for Steel Frame Pistols

The Eemann Tech Adjustable Thumb Rest is designed for any flat steel frame pistol. It is specifically installed on the left-hand side of the pistol for right-handed shooters.

• Thumb rest angle: 35 degrees
• Adjustable range: 11mm
• Adjusting step: 1mm
• Thumb rest surface: Checkered
• Material: Aviation Aluminium
• Attachment method: Screw size - M4 x 0.7mm (2 pieces)
• Total length: 38mm
• Total height: 14.5mm
• Thumb rest width: 12.5mm

*Not compatible with CZ TSO, CZ TS2

CHIEN MATCH SA "SIMPLE ACTION" CZ

Chien "SA" Simple action pour CZ 75, CZ 75 Compact, CZ 85, CZ 97, CZ SP-01

L'installation doit se faire par un armurier compétent.

LPA MP276F FRONT SIGHT FOR CZ P-07, P-09, CZ SHADOW 2 KADET

Color: Black
Total Height: 8,0 mm
Compatibility: CZ P-07, P-09, CZ Shadow 2 Kadet
For models: SPR24CZ7F
LPA Code: MP276F

Note:
• Please check sight is correct before fitting! Altered Sights CAN NOT be returned for credit
• Must be installed by qualified gunsmith

EEMANN TECH SAFETY DETENT PLUNGER RIGHT FOR CZ

The Eemann Tech Safety Detent Plunger Right is a high-quality, precision-machined steel component designed to ensure consistent and secure engagement of the manual safety mechanism in CZ 75 series pistols. This right-side detent plunger is engineered to be a direct replacement for the original factory part, offering improved reliability and performance for competitive shooters and firearm enthusiasts.

Compatible with:

• CZ 75 B
• CZ 75 Shadow Line
• CZ 75 SP-01
• CZ 75 SP-01 Shadow
• CZ 75 Tactical Sports
• CZ Shadow 2
• CZ TS 2

Specification:

• Material: Steel
• Color: Black
• Position: Right
• OEM Reference: 0420-0461-17ND

MALLETTE PISTOLET CZ AVEC KIT NETTOYAGE

EEMANN TECH NUMBERED GRIP TAPE SET X10

The Eemann Tech Numbered Grip Tape for Magazine Base Pads offers a smart solution for magazine identification and grip enhancement. Precision-cut from high-quality 3M grip tape, each piece features a laser-cut number from 0 to 9, making it easy to track individual magazines during competitive shooting or training.

Designed to improve handling and reload consistency, the textured surface provides superior control while the strong adhesive ensures long-lasting attachment, even with frequent use. This accessory not only enhances grip but also helps protect your base pads from wear and tear. Perfect for shooters seeking better organization and reliable performance in dynamic conditions.

Specification:

• Set includes 10 grip tape pieces (numbers 0–9)
• Material: High-quality 3M grip tape
• Dimensions: 22?mm x 34?mm
• Fits most double-stack pistol magazines
• Textured surface for improved grip and control
• Strong adhesive backing for secure application
• Color: Black
• Durable for repeated use

EEMANN TECH LOW PROFILE LARGE SAFETY LEFT FOR CZ SHADOW 2/TS

The Eemann Tech Low Profile Large Safety Left for CZ Shadow 2/TS is a high-quality replacement thumb safety. It features a low-profile design that is 3mm farther and 3mm lower than the factory OEM large safety. Made from durable carbon steel and treated with the best heat-treatment process, this safety is built for long-lasting performance. The black finish complements the firearm's design, while the large serrations on the thumb provide an excellent grip. This safety is fully compatible with the CZ OEM right-side safety, ensuring seamless operation and easy engagement or disengagement of the safety function.

Specifications:

• Material: Carbon steel
• Finish: Black
• Profile: 3mm lower and farther than OEM
• Compatibility: CZ Shadow 2, Tactical Sports (TS)
• Design: Large serrations for superior grip
• Works with CZ OEM right-side safety

EEMANN TECH SA TRIGGER FOR CZ 75, HOOKED (COLOR: SILVER - TYPE: SMOOTH)

The Hooked trigger for different CZ models. Single Action Only!

This trigger is suitable for pistols with SINGLE ACTION TRIGGER system ONLY! It is not compatible with double action systems. Not operative for models with a firing pin block!

Designed for pistols:

• CZ 75
• CZ 85
• CZ 75 SP-01
• CZ 75 SP-01 Shadow
• CZ Shadow 2
• CZ 97
• CZ 75 Tactical Sports
• CZ TS2

Variations:

• Smooth

Material: Aluminium

The set includes:

• Eemann Tech SA Trigger for CZ 75 - 1 pc.
• Screw for Eemann Tech triggers for CZ (ET-131002) - 2 pcs.
• Competition Trigger Pin (ET-130064) - 1 pc.
• Competition Trigger Spring (ET-131109) - 1 pc.
• 1.5 mm L-Shape Hex Key (ET-030012) - 1 pc.

BUSC REGLABLE KALIXTEKNIK CZ 455

Le CR1 est un repose-joue polyvalent spécialement conçu pour les armes dont la crosse est en matériaux composites.
Convenant à plus de 90 modèles, nous couvrons les modèles de base sur le marché.
Presque tous les fusils produits aujourd'hui ont des crosses qui conviennent aux viseurs ouverts, les réticules mécaniques fixes qui sont généralement montés en usine.
Mais même les réticules montés en usine ne sont pas adaptés individuellement en hauteur ce que le repose joue réglable CR1 résout.
Dans la plupart des cas, le propriétaire choisit d'installer ultérieurement une forme de rectile externe tel que Aimpoint® ou d'autres lunettes de visée traditionnelles de taille variable.
Cela provoque une mauvaise ou inexistante plante de la joue du tireur contre le peigne et le tir est affecté négativement.

Notre repose-joue CR1 offre une solution pour obtenir rapidement une position précise et ergonomique de la joue, indépendamment du fait de tirer avec des lunettes de visée montées en usine et/ou modifiées.
Avec une opération simple, la hauteur est ajustée selon les besoins de l'utilisateur et les circonstances, en mettant l'accent sur la haute qualité et l'amélioration de l'ergonomie de l'arme.
Avec ou sans le réticule monté, nous établissons un nouveau standard avec la série de repose-joues réglables CR.
Nous voulions un produit qui soit léger et durable.
Après des heures de réflexion, nous avons mis au point un mécanisme sans boutons ni vis sur le côté.
Aucun outil n'est nécessaire pour régler la hauteur. Cela rend ce produit parfait pour les armes à crosse en bois.

CZ 457 11MM HD PICATINNY SCOPE MOUNT - EGW CZ 457 11MM 1-PIECE PICATINNY BASE 20 MOA

1. Le montage monobloc EGW est idéal pour les chasseurs et tireurs tactiques, offrant flexibilité et compatibilité avec les anneaux Picatinny ou Weaver.
2. Usiné en aluminium, il est poli, sablé et anodisé de type III pour une durabilité accrue.
3. Recommandé pour un réglage à 200 yards avec un montage de 20 MOA, il inclut des vis de montage et une clé, tous fabriqués aux USA.

DPM MS-CZ/5 CZ 75 TS (TACTICAL SPORT)

Advanced Multi-Spring System for Enhanced Firearm Performance

This system operates through a multi-spring intricate rod (three springs) that controls the functionality of the gun. The third spring, contained within the rod, manages the movement of the slide, preventing it from ramming on the frame. Additionally, two separate springs are included, allowing the owner to fine-tune the weapon to personal standards.

Overall Advantages

• Faster follow-up shots
• Improved firing speed
• Slide and frame protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

System of Multiple Springs
The system comprises three or more springs of different sizes for specific compression, housed in a metal tube. Its mission is to control the backward motion of the slide at the moment of the bullet's firing. The initial pressure exerted by the system is almost the same as the standards of the factorial springs. However, at the final phase of the system's coiling, the pressure difference exerted on the slide is 80% - 100% more. Consequently, the slide never rams against the frame, and jams are eliminated.

Materials
All metal elements are made of stainless steel W.-Nr./Grade 1.4301 (AISI 304), manufactured in a factory compliant with ISO9000 standards. All springs are made of steel or high carbon steel with a cadmium (Cd) finish*. The cadmium finish, which adds considerable cost to the manufacturing process, makes the spring impervious to the elements, including salt water.

DPM MS-CZ/7 CZ 97 B/BD 45ACP

Advanced Recoil Management System for CZ 97 B/BD 45ACP

This system works due to the multi-spring intricate rod (three springs) and controls the functionality of the gun. The third spring, which is contained within the rod, controls the movement of the slide so it never rams on the frame. Also accompanying this system are two separate springs, allowing the owner to fine-tune the weapon to personal standards.

Overall Advantages

• Faster follow-up shots
• Improved firing speed
• Slide and frame protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

System of Multiple Springs
Three or more springs of different sizes for specific compression, housed in a metal tube. The mission of the system is to control the backward motion of the slide at the moment of the bullet's firing. The initial pressure that the total of the system exhibits is almost the same as the standards of the factorial springs. But at the final phase of the system's coiling, the difference in pressure exerted on the slide is in the order of 80% - 100% more. Consequently, the slide never rams against the frame, and jams are eliminated.

Materials
All metal elements: stainless steel W.-Nr./Grade 1.4301 (AISI 304) - made in a factory compliant with ISO9000.

All springs are made of steel or high carbon steel with a cadmium (Cd) finish *.

*The cadmium finish (which adds considerable cost to the manufacturing process) makes the spring impervious to the elements (including salt water).

DPM MS-CZ/14 12 SETTING CZ 75 SP 01 - SHADOW SHADOW LINE-MAMBA-TACTICAL-PHANTOM 

Advanced Multi-Spring System for Enhanced Firearm Performance

This system operates through a multi-spring intricate rod (three springs) that controls the functionality of the gun. The third spring, contained within the rod, manages the movement of the slide to prevent it from ramming on the frame. Additionally, two separate springs are included, allowing the owner to fine-tune the weapon to personal standards.

Overall Advantages

• Faster follow-up shots
• Improved firing speed
• Slide and frame protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

System of Multiple Springs

Three or more springs of different sizes are used for specific compression, housed in a metal tube. The system's mission is to control the backward motion of the slide at the moment of the bullet's firing. The initial pressure exhibited by the system is almost the same as the standards of the factorial springs. However, at the final phase of the system's coiling, the pressure exerted on the slide increases by 80% - 100%. Consequently, the slide never rams against the frame, and jams are eliminated.

Materials

All metal elements are made of stainless steel W.-Nr./Grade 1.4301 (AISI 304) in a factory compliant with ISO9000. All springs are made of steel or high carbon steel with a cadmium (Cd) finish. The cadmium finish, which adds considerable cost to the manufacturing process, makes the spring impervious to the elements, including salt water.

DPM MS-CZ/17 12 SETTING CZ SHADOW 2 9MM 12 USER ADJUSTABLE SETTINGS

Advanced Multi-Spring System for CZ Shadow 2 9mm

This system operates through a multi-spring intricate rod (three springs) and manages the functionality of the gun. The third spring, contained within the rod, controls the movement of the slide, preventing it from ramming on the frame. Additionally, this system includes two separate springs, allowing the owner to fine-tune the weapon to personal standards.

Overall Advantages

• Faster follow-up shots
• Improved firing speed
• Slide and frame protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

System of Multiple Springs

Three or more springs of different sizes are used for specific compression, housed in a metal tube. The system's mission is to control the backward motion of the slide at the moment of the bullet's firing. The initial pressure exerted by the system is almost the same as the standards of the factorial springs. However, at the final phase of the system's coiling, the pressure difference exerted on the slide is 80% - 100% more. Consequently, the slide never rams against the frame, and jams are eliminated.

Materials

All metal elements are made of stainless steel W.-Nr./Grade 1.4301 (AISI 304) in a factory compliant with ISO9000. All springs are made of steel or high carbon steel with a cadmium (Cd) finish. The cadmium finish, which adds considerable cost to the manufacturing process, makes the spring impervious to the elements, including salt water.

DPM MS-CZ/23 FOR CZ SHADOW 2 COMPACT 4" BARREL

Enhance Your CZ Shadow 2 Compact with DPM Recoil Reduction System

The CZ SHADOW 2 COMPACT 4" Barrel Recoil Reduction System by DPM Systems enhances firearm performance using a patented recoil rod that includes three springs to manage the slide's motion, preventing frame impact. This technology improves shot accuracy, speed, and control, leading to enhanced firing performance and reduced recoil. The system fits seamlessly without requiring any modifications to the firearm, making it ideal for competitive and recreational shooting.

Specifications:

• Includes multi-spring recoil rod and four external springs with varying lengths and strengths.
• Gold-coated springs (1.0 mm wire diameter) offer softer slide travel.
• Silver-coated springs (1.1 mm wire diameter) provide more resistance.
• No modification required for installation.
• Improves firing speed, accuracy, and control.
• Significantly reduces recoil.
• Made in Greece.

DPM Code: 1000308

DPM MS FOR CZ TS ORANGE & TS 2 9MM -12 COMBINATIONS

DPM Mechanical Recoil System for CZ TS Orange & TS 2 9mm

The DPM Mechanical Recoil Reduction System for CZ TS 2 & TS Orange 9mm offers 12 combinations for optimal performance. This system utilizes a multi-spring intricate rod with three springs to control the pistol's functionality. The third spring, contained within the rod, manages the slide's movement to prevent it from ramming the frame. The system includes four different springs and three Spring Plugs, allowing shooters to fine-tune the pistol's opening and locking positions.

The two short springs with a wire diameter of 1.0mm are designed for use with heavy ammunition, while the two long springs with a wire diameter of 0.95mm are suitable for soft and hand-loaded ammunition. This allows shooters to adjust the pistol according to their personal standards.

Power Rates:

• Slide on the battery (idle position)
• External Spring 1 (Short): 5.7 lbs
• External Spring 2 (Short-Medium): 6.6 lbs
• External Spring 3 (Medium-Long): 7.3 lbs
• External Spring 4 (Long): 8.4 lbs

Slide Full Open Position:

• Short Plug: 15 lbs approx.
• Medium Plug: 19 lbs approx.
• Long Plug: 23 lbs approx.

Overall Advantages:

• Faster follow-up shots
• Improved firing speed
• Slide and frame protection
• Elimination of jams
• Significant recoil reduction
• Better double-tap concentration
• Better control and greater accuracy

DPM Code: 1000236

LPA MP276F FRONT SIGHT FOR CZ P-07, P-09, CZ SHADOW 2 KADET

CZ 75 MAIN SPRING

EEMANN TECH MAIN SPRING FOR CZ 75 12 LBS

High-Performance Eemann Tech Main Spring for CZ 75 Models

Eemann Tech CZ 75 Main spring is compatible with the following models:

• CZ 75 B
• CZ 85 B
• CZ 75 SP-01
• Tactical
• Shadow
• Shadow 2
• Tactical Sports
• Tactical Sports 2

EEMANN TECH EXTREME TRIGGER SPRING (+10% POWER) FOR CZ 75

Enhanced Eemann Tech Trigger Spring for CZ 75 Series

Eemann Tech Extreme Trigger Spring with stronger power for CZ 75 B, CZ 85 B, CZ 75 SP-01 / Tactical / Shadow / Shadow 2.

Material:

• Steel

SEAR FOR CZ 75 / GACHETTE CZ 75

EEMANN TECH FRONT SIGHT FOR CZ 75, CZ SHADOW 2, CHECKERED, STEEL

Optimized Eemann Tech Front Sight for CZ 75 and CZ SHADOW 2

The Eemann Tech CZ 75 Front Sight has been specially developed and produced for CZ SHADOW 2, CZ 75 handguns, and variants. Available height options of the sight range from 5mm to 9.5mm. This choice availability allows for customization and compatibility with rear sights and custom ammunition point of impact for any shooting discipline.

There are also width options ranging from 3.0mm, 2.7mm, and our new 2.4mm. These choices allow for a balance between fast sight alignment and accuracy depending on your preference and discipline.

We also offer the option of 1.0mm or 1.5mm fiber. The visible side of the Eemann Tech front sight is checkered to obtain maximum clarity and eliminate glare that is common for polished surfaces.

The hole for the fiber optic rod is slightly recessed at the front of the sight to allow a very small micro dot while still holding the fiber securely. A small pre-cut pilot hole has already been preliminarily made in the base of the front sight for more accurate and controlled drilling when installing the front sight to the slide.

The height of the front end of the Eemann Tech CZ 75 Front Sight is higher than its back end, making the visible side of the sight sharper while aiming with no interference around the edges. The latest technology coating keeps the appearance of the sight much longer than factory-made front sights.

Specifications:

• Fiber Optics Rod Diameter: NO
• Height: 5.00 - 8.00 mm with step 0.5 mm
• Front sight Width: 3.0 mm

The set includes:

• 1 pc. - Blister Package
• 1 pc. - Front Sight
• 1 pc. - Front Sight Pin for CZ (ET-130058)